Chamotte

Ceramic material ECOBODY ChM-2P, technical requirements TU U 14.2-32359731-001:2006 is a mix of chamotte powder with fine-milled fire-clays and fluxes. It is designed for the production of decorative-artistic wares with increased demand to strength and frost-resistance. It is ideal for landscape ceramics.

The product has stable quality, rather high strength in dry state, good forming properties. It is less sensitive to the drying process.

The material can be fired both in gas and in electric kilns.

Ceramic material ECOBODY ChM-3P, technical requirements TU U 14.2-32359731-001:2006 is a mix of chamotte powder with fine-milled fire-clays and kaolin. It is designed for the production of decorative-artistic wares both for interior and exterior application (facade and landscape ceramics).

The product has stable quality, rather high strength in dry state, good forming properties. It is less sensitive to the drying process.

The material can be fired both in gas and in electric kilns.

Ceramic material ECOBODY ChM-4P, technical requirements TU U 14.2-32359731-001:2006 is a mix of chamotte powder with fine-milled fire-clays, mineralizers and feldspar. It is designed for the production of decorative-artistic wares both for interior and exterior application (facade and landscape ceramics).

The product has stable quality, rather high strength in dry state, good forming properties. It is less sensitive to the drying process.

The material can be fired both in gas and in electric kilns.

Ceramic material ECOBODY ChM-6P, technical requirements TU U 14.2-32359731-001:2006 is a mix of fine-dispersed chamotte powder with fine-milled fire-clays and fluxes. It is designed for the production of light-firing wares of decorative-artistic purposes both for interior and exterior application (landscape ceramics, elements of the fronts and buildings).

The product is supplied as a plastic vacuum-processed ceramic body shaped like bars (brick-formed).

The product has stable quality, good forming properties. It is low-sensitive to the drying process.

The material can be fired both in gas and in electric kilns.

Ceramic material ECOBODY ChM-4K, technical requirements TU U 14.2-32359731-001:2006 is a powdery product (powder) with high strength in dry state, sufficient plasticity and stable quality.

The product is most suitable for the production of the engobes, building and decorative mixtures, as well as a correcting additive to ceramic materials of various compositions to obtain various color tints and improve technological properties.

Ceramic material ECOBODY ChM-4F, technical requirements TU U 14.2-32359731-001:2006 is a powdery product, produced on basis of fine-milled fire-clays, with high plasticity, high strength in dry state and stable quality.

The product is most suitable for the production of the engobes, building and decorative mixtures, as well as a correcting additive to ceramic materials of various compositions to improve their physicochemical and technological properties.

Ceramic material ECOBODY ChM-7P, technical requirements TU U 14.2-32359731-001:2006 is a plastic evacuated mass with the addition of small chamotte from 0 to 0,5 mm. It is intended for the manufacture of light-glowing ceramic products of art and household use, construction ceramics (tiles for facing fireplaces, facade elements, etc.) by extruding, stamping, molding on a potter's wheel, tapping in plaster molds, hand-made molding.

The product has a stable quality, good molding and drying properties, a sufficiently high plasticity, strength in the dry and baked state, a wide sintering interval.

Due to the high strength characteristics, the glazing of the semi-finished product is possible on a dry shard, followed by a single firing in gas or electric furnaces.